Live Interface; Chapter 5: Dvr Menu - TECHVIEW QV-3039 User Manual

4.2 Live Interface

Picture 4-2
Note: When internal HDD is not connected or an error occurs, the character "H" When internal HDD is not connected or an error occurs, the character "H" will appear on the first When internal HDD is not connected or an error occurs, the character "H"
channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter
into [Main menu Alarm] to set HDD loss, HDD space not enough and alarm output to "off" Alarm] to set HDD loss, HDD space not enough and alarm output to "off" Alarm] to set HDD loss, HDD space not enough and alarm output to "off"
Pop-up Menu
Picture 5-1
After finishing initialization the system will enter into After finishing initialization the system will enter into
<Live> screen. Picture 4-2 is the
system, which is showing no video input status. Once there system, which is showing no video input status. Once there
are video inputs, the screen will display live images from the
cameras. In Live mode, if you use the mouse to double
the live image of any channel, the image will be maximized to the live image of any channel, the image will be maximized to
full screen, by double-clicking again,
to 16-split display mode; clicking the right button of the mouse
will enter into Pop-up Menu; clicking the left button of the
mouse allows you select menu items;
outside the menu allows you exit the Pop

Chapter 5: DVR Menu

After finishing system initialization, click right After finishing system initialization, click right
key of mouse on main interface mode to enter into key of mouse on main interface mode to enter into
Pop-up Menu. Now you could perform
setting and operate on Main Menu, Multi
Auto Cruise, Zoom in/out, Rec. Search, Manual Auto Cruise, Zoom in/out, Rec.
record, Sequence, PIP, and Vo Switch
Clicking [0] key on the remote controller or Clicking [0] key on the remote controller or
holding press [Esc] key on the front panel could holding press [Esc] key on the front panel could
switch system to other output device. switch system to other output device.
7
16-split display defaulted by
will display live images from the
mode, if you use the mouse to double-click
clicking again, image will be come back
; clicking the right button of the mouse
clicking the left button of the
you select menu items; and clicking any area
exit the Pop-up menu.
perform parameter
Main Menu, Multi-Pics, PTZ,
and Vo Switch etc.
User Manual