Ddns Set; Alarm; Motion - TECHVIEW QV-3039 User Manual

Sender address: indicates sender's email address. The email address should be consistent with the
server you use. That is to say, when you use email address – aaa@gmail.com, the according server
should be smtp.gmail.com.
Receiver address: indicates receiver's email address. The email address is used to receive image
transmitted from DVR alarm. Please clear the images you have received as soon as possible to avoid
overloading your email account.
Picture 5-38

5.2.4.6 DDNS Set

Picture5-41
Click [Apply] button and restart the DVR; and then enter the domain name (such as:
http://superdvr.3322.org:8080) to visit your remote DVR.

5.2.5 Alarm

5.2.5.1 Motion

Click [Main menu Alarm Motion] to enter into the interface shown as Picture 5-42.
Picture 5-42
Server: select DDNS provider
Host name: input the host domain name you
have registered at dynamic domain name
system, such as: DVR2009.3322.org;
User Name: Input a user name registered
before applying for a domain name;
Password: Input a password you set when
registering a user name.
Channel: allow you enable/disable the
motion function for any channel.
Area: Click the [Setup] button to enter
into area setup interface shown as
Picture 5-41.
Sensitivity: allow you to set sensitivity
level of motion detection from higher to
low with 8 being the most sensitive.
Alarm out: allow you connect external
alarm sensor.
20
User Manual