Purchase With Smart Card - VeriFone Vx510 Instructions For Use Manual

POS terminal Vx510
1. Data
Time
READY FOR TRANSACTION
Pull card
2. Purchase
Enter amount
LVL 1.00
4.
LVL
Processing going on
5.
ENTER PIN
6. Please wait....
Calling...
Transaction confirmed.

6. Purchase with smart card

Menu F1 Insert card into chip card reader of the terminal (see
device (Picture 5.) with chip upwards. Card proccessing is
F2 going on.
F3
F4
F1
Transaction amount must be entered, then pressed [ ] key.
F2
F3
F4
F1
After entering of transaction amount, merchant must give
the terminal to client, for entering client's PIN.
F2
1.00
F3
F4
F1
Client enters into terminal his/her code and press green
confirmation button. If the client makes a mistake during
F2
entering PIN, it is possible to clear incorrectly entered
numbers by pressing yellow button, or break the operation
F3 by pressing red button.
F4
F1 After entering PIN and its confirmation, terminal will start
to process transaction and different messages will be
F2 displayed on the terminal screen. As a result of successful
transaction two copies of reciept will be printed. As a
F3 result of unsuccessful operation will be printed one copy
of reciept with explanation of rejection.
F4
10
Instructions for use