Introduction - VeriFone Vx510 Instructions For Use Manual

POS terminal Vx510
This document is designed for users of card reading POS terminal (thereafter - 'terminal'). In this manual you can find
all information necessary to use efficiently possibilities of the terminal, as well as suggestions for actions in case of different
problem situations.
Terminal is an electronic device, intented for automation of card payments within various types of enterprises.
To make a payment with card, using terminal, seller must perform only a few operations:
check card visually;
pull the card throught the reader
enter amount of transaction;
register the deal correctly;
compare the number on card with number on the receipt;
compare the client's signatures on the reciept and the card;
in case if aumount of transaction exceeds 150 Ls, ask for the client's documents and call to authorisation
center, and report "Code 10" .
Terminal automatically perform the following operations:
check if enterprise accepts this type of cards;
check card's validity term;
check if card is not in the STOP list;
perform the authorisation, if the transaction exceeds the limit of authorisation
As a resut of verification the deal receipt is printed automatically, and the transaction is stored into terminal's
memory. During the session of data transmission the terminal automatically transmits accumulated deals to card payment's
center.
If you have uncertainties or issues, which is not described in this manual – call the authorisation center service
department by phone number indicated on your terminal.

1. Introduction

3
Instructions for use