S
ETUP
Smart Card Reader
To Connect the
Terminal Power
Supply
TIP
Manual Startup
Manual Shutdown
NOTE
Smart Card
Reader
20
640
I
M
NSTALLATION
Insert the USB-C to the 640m and USB-A port to the power supply or Desktop.
See
Figure 5.
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
Hold the start button for about 3 seconds until the device displays the startup
screen.
Hold the start button until the power menu is displayed on the screen. Touch the
"Power Off" soft key to turn off
The screen is blank when the device has no power.
The smart card transaction procedure can vary depending on the application.
Verify the proper procedure with your application provider before performing a
smart card transaction.
Figure 6
Using the Smart Card Reader
G
UIDE
.