Using The Smart Card Reader; Using The Magnetic Stripe Reader - VeriFone e355 Installation Manual

Using the Smart
Card Reader
To conduct a smart
card transaction
Using the Magnetic
Stripe Reader
To conduct a credit/
debit card transaction
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position the smart card with the contacts facing in the same direction as the
keypad.
2
Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.
Figure 8 Inserting a Smart Card
3
Wait for the application to indicate a completed transaction before removing
the card. Premature card removal invalidates the transaction.
Use the magnetic stripe reader to perform credit and debit card transactions.
1
Position the card with the magnetic stripe facing backwards.
2
To ensure a proper read of the magnetic swipe card, insert the magnetic card
from the top of the device, as shown in
Figure 9 Using Magnetic Stripe Card
3
Swipe the card through the magnetic card reader.
Examining e355 Device Features
Figure 9.
355 I
E NSTALLATION
D S
EVICE ETUP
17
G
UIDE