Loading The Sheet - Roland Camm-1 PNC-1850 User Manual

1-4-3 Loading the Sheet

You can load sheet measuring between 50 mm (1-15/16") and 1220 mm (48") in width (horizontal dimension) on the PNC-1850,
or sheet measuring between 50 mm (1-15/16") and 762 mm (30") in width (horizontal dimension) on the PNC-1200. However, a
sheet with a width of 50 mm (1-15/16") to 762 mm (30") can be loaded only if it is a flat sheet or a rolled sheet with a sheet base.
When using a stand (PNS-121), a rolled sheet with a width in the range of 50 mm (1-15/16") to 610 mm (24") can be loaded.
There is no particular restriction on sheet length (vertical dimension). This means that you can use either flat sheets such as
standard-size sheets (ANSI, ISO, etc.) and cut sheets, or roll sheets.
The grit rollers on the PNC-1850 are divided into three areas that can secure the sheet with the pinch rollers. Also, The grit
rollers on the PNC-1200 are divided into two separate areas. The range of movement is determined by the movable pinch rollers
on the left and right. Experiment with the range of the left and right movable pinch rollers to determine usable area.
Reference — Sheet Loading Position
PNC-1850
Move the left pinch
roller to align it with
the left edge of the
For a sheet between 50 mm (1-15/16") and 280 mm (11") in width, load the sheet above grit roller (3), and move the left and
right pinch rollers to the edges of the sheet.
For a sheet between 280 mm (11") and 760 mm (29-15/16") in width, load the left edge of the sheet above grit roller (2) and the
right edge of the sheet above grit roller (3), and move the left and right pinch rollers to the edges of the sheet.
For a sheet between 760 mm (29-15/16") and 1220 mm (48") in width, load the left edge of the sheet above grit roller (1) and
the right edge of the sheet above grit roller (3), and move the left and right pinch rollers to the edges of the sheet.
The right pinch roller can only be moved above grit roller (3). The left pinch roller can be moved above grit rollers (1) to (3).
PNC-1200
For a sheet between 50 mm (1-15/16") and 230 mm (9-1/16") in width, load the sheet above grit roller (2), and move the left
and right pinch rollers to the edges of the sheet.
For a sheet between 230 mm (9-1/16") and 762 mm (30") in width, load the left edge of the sheet above grit roller (1) and the
right edge of the sheet above grit roller (2), and move the left and right pinch rollers to the edges of the sheet.
The right pinch roller can only be moved above grit roller (2). The left pinch roller can be moved above grit rollers (1) to (2).
8
Range of movement for the left movable pinch roller
* Do not set the pinch roller here.
Grit roller 1
sheet
Sheets between 760 mm (29-15/16") and 1220 mm (48") in width
Range of movement for
the left movable pinch roller
* Do not set the pinch roller here.
Grit roller 1
Move the left pinch roller to align
it with the left edge of the sheet
Range of movement for the right movable
Grit roller 2
Move the left
pinch roller to
align it with the
left edge of the
sheet
Move the left pinch
roller to align it with
the left edge of the
sheet
Sheets between 280 mm
(11") and 760 mm
(29-15/16") in width
Range of movement
for the right movable
pinch roller
Grit roller 2
Move the right pinch roller to align
it with the right edge of the sheet
Move the left
pinch roller to
align it with the
Sheets between
left edge of the
50 mm (1-15/16") and
sheet 230 mm (9-1/16") in
width
Move the right pinch roller to align
it with the right edge of the sheet
Sheets between 230 mm
(9-1/16") and 762 mm
(30") in width
pinch roller
Grit roller 3
Move the right pinch
roller to align it with
the right edge of the sheet
Sheets between
50 mm (1-15/16") and
280 mm (11") in width
Move the right pinch
roller to align it with
the right edge of the sheet
Move the right pinch
roller to align it with
the right edge of the sheet