Tpm Support Enable; Watch Dog Enable/Disable; Com3 Redirection Select - Supermicro Super X7SPA-L User Manual

X7SPA-L/X7SPA-H/X7SPA-HF User's Manual

TPM Support Enable

JPT1 allows the user to enable TPM
(Trusted Platform Modules) support
to enhance data integrity and system
security. See the table on the right for
jumper settings. The default setting is
enabled.

Watch Dog Enable/Disable

Watch Dog (JWD) is a system monitor that
can reboot the system when a software ap-
plication hangs. Close pins 1~2 to reset the
system if an application hangs. Close pins
2~3 to generate a non-maskable interrupt
signal for the application that hangs. See
the table on the right for jumper settings.
Watch Dog must also be enabled in the
BIOS.

COM3 Redirection Select

This is an OEM option for the X7SPA-H/
X7SPA-HF only.
KB/MOUSE
FAN1
SYS
COM1
J10 J11
J13
JVGA1 J12
A
LAN1
LAN2
AUDIO FP
JI2C1
CD-in
JSMB1:SMBus1
JSMB1
FAN2 JLPC80
FAN
JBT1:
COMS CLEAR
JPC3
JI2C2
+
SP1
C
JPL1
JPL2
JL1 JPG1
JBMC1
JPCIE1 SLOT1 PCI-E X4 (IN X16 SLOT) X7SPA-L
JI2C1 ON:ENABLE REV:1.00
OFF:DISABLE
2-26
TPM Support Enable
Jumper Settings
Jumper Setting
1-2
2-3
Watch Dog
Jumper Settings (JWD)
Jumper Setting
Pins 1-2
Pins 2-3
Open
COM3 Select (JPC3)
Jumper Setting
Pins 1-2
Pins 2-3
Open
JPW1
JPI2C1
I-SATA2 I-SATA1 I-SATA0
T-SGPIO2 T-SGPIO1 J2
ON:ENABLE
OFF:DISABLE
I-SATA5 I-SATA4 I-SATA3
D17
J8
JBAT1
JPUSB1
JOH1
JUSB4
JUSB3
Definition
Enabled
(Default)
Disabled
Definition
Reset
(default)
NMI
Disabled
Definition
RS232
(default)
TTL
Disabled
TPM Enable
A
B Watch Dog Enable
C COM3 Redirect
(OEM option for the
X7SPA-H/X7SPA-HF
only).
B