Tools Needed; Location Of Mounting Holes; Motherboard Installation - Supermicro Super X7SPA-L User Manual

X7SPA-L/X7SPA-H/X7SPA-HF User's Manual
2-2

Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Caution: Some components are very close to the mounting holes. Please
take precautionary measures to prevent damage to these components
when installing the motherboard to the chassis.

Tools Needed

Philips Screwdriver
Note: The above items are not provided with this motherboard.

Location of Mounting Holes

There are four (4) mounting holes on this motherboard indicated by the arrows.
Pan head screws (4 pieces)
KB/MOUSE
JSMB1
FAN1 FAN2
FAN
SYS
COM1
J10 J11
J13
J12
JVGA1
LAN1
LAN2
AUDIO FP
JI2C1 JPL2
SLOT1 PCI-E X4 (IN X16 SLOT)
JPCIE1
JI2C1 ON:ENABLE
CD-in
OFF:DISABLE
JSMB1:SMBus1
JLPC80
JBT1:
COMS CLEAR
JPC3
T-SGPIO2 T-SGPIO1
+ JI2C2 ON:ENABLE
OFF:DISABLE
SP1
JBAT1
JPL1
JPG1
JL1 JBMC1
X7SPA-L
REV:1.00
2-2
Stand Offs (4 pieces)
(Only if needed)
JPW1
JPI2C1
I-SATA2 I-SATA1 I-SATA0
J2
I-SATA5 I-SATA4 I-SATA3
D17
J8
JPUSB1
JOH1
JUSB4
JUSB3