Speed Dials - Pantech Verizon Jest 2 User Manual

8. Under Subject, input a subject using the QWERTY Keypad.
9. Press the Right Soft Key [Options] to select from the following:
Review, Save As Draft, Insert Quick
These options will vary depending on the message contents chosen.
10. To send the Voice Message, press the
.

SPEED DIALS

From idle mode, calls can be placed to numbers stored in speed dials by sliding the
phone up, and pressing & holding the location number on the keypad.
1. Slide the phone up, press the
5. Speed Dials.
2. Highlight the desired Speed Dial position, or enter the Speed Dial digit(s), then
press the Key [SET].
3. Select the desired Contact entry, then press the
4. Highlight the number you wish to set to speed dial then press the
5. "ASSIGN SPEED DIAL TO CONTACT?" appears on the screen. Select
press the Key. A confirmation message appears.
"Unassigned" appears if the location is available.
TO ERASE A SAVED SPEED DIAL
1. Slide the phone up, press the
5. Speed Dials.
2. Select the Speed Dial entry you want to erase.
3. Press the Right Soft Key [Remove].
4. "REMOVE SPEED DIAL?" appears on the screen. Select
Key. A confirmation message appears.
58
Text, Priority Level or Cancel Message.
Key [SEND] or press the SEND Key
Key [MENU], then press 1. Contacts,
Key.
Key.
Yes and
Key [MENU], then press 1. Contacts,
Yes and press the
IN CASE OF EMERGENCY
Your phone has a special menu to organize your emergency contacts and personal
information.
TO ASSIGN EMERGENCY CONTACTS
Follow the procedures below to register a Contact to be contacted in case of emergency,
or to register a medical record number or other personal info. To register up to three
different Contacts to ICE:
1. Slide the phone up, press the Key [MENU], then press
6. In Case of Emergency.
Shortcut:
From idle mode, slide the phone up and press the Right Soft Key
[Contacts], then select In Case of Emergency
Contact 1, Contact 2 Contact
2. Select or
3. To select a contact from the Contacts List, press
the Contact entry, and then press the
CONTACT, press 2. New Contact, enter the info, and then press the
[SAVE].
4. The Contact name will be displayed in the place of
Contact 3.
TO RE-ASSIGN EMERGENCY CONTACTS
1. Slide the phone up, press the Key [MENU], then press
6. In Case of Emergency.
2. Select the contact you want to re-assign, press the Right Soft Key
[Options], then press 1. Re-assign.
3. To select a contact from the Contacts List, press
Contact entry, and then press the
CONTACT, press 2. New Contact, enter the info then press the
4. A confirmation message appears.
1. Contacts,
and press the Key [VIEW].
3, then press the
Key [ADD].
1. From Contacts, select
Key. To add a new contact as an ICE
Key
Contact 1, Contact 2 or
1. Contacts,
1. From Contacts, select the
Key. To reassign a new contact as an ICE
Key [SAVE].
01 01
02 02
03 03
04 04
05 05
06 06
07 07
59 58