Speed Dials - Pantech Caper User Manual

6. Under Sound, press the Left Soft Key
would like to send then press the OK Key. Press the Directional Key
7. Under Name Card, press the Left Soft Key
Card or 2. From Contacts. If From Contacts
Key up or down to highlight a desired contact or contacts, then press the
OK Key [MARK]. Press the Left Soft Key
selecting contacts. Press the Directional Key
8. Under Subject, input a subject using the QWERTY Keypad.
9. Press the Right Soft Key
Preview, Save As Draft, Insert Quick
Remove Picture, Remove Slide,
Cancel Message.
These options will vary depending on the message contents chosen.
10. To send the Picture Message, press the OK Key [SEND] or press the SEND Key
.
TO SEND A VOICE MESSAGE TO A GROUP
1. From the home screen, press the
4. Groups.
2. Select the group you want to send a voice message to, then press the Right
Soft Key [Options].
3. Press 3. New Voice Message.
4. To record a new Voice Memo, press the OK Key to start recording, then press the
OK Key [STOP] to finish recording.
5. Under Voice, your recorded file name will appear. Press the Directional Key
down.
6. Under Text, input your message then press the Directional Key
7. Under Name Card, press the Left Soft Key
Card or 2. From Contacts. If From Contacts
50
[Sounds], select the sound you
[Add], select 1. My Name
is selected, press the Directional
[Done] when you have finished
down.
[Options] to select from the following:
Text, Add Slide, Priority Level,
Remove Sound, Remove Name Card
[MENU], then press 3. Contacts,
down.
[Add], select 1. My Name
is selected, press the Directional
Key
down. OK Key [MARK]. Press the Left Soft Key
selecting contacts. Press the Directional Key
8. Under Subject, input a subject using the QWERTY Keypad.
9. Press the Right Soft Key
Review,
Recording,
These options will vary depending on the message contents chosen.
10. To send the Voice Message, press the OK Key [SEND] or press the SEND Key .
or

SPEED DIALS

From the home screen, calls can be placed to numbers stored in speed dials, and
pressing & holding the location number on the keypad.
1. From the home screen, press the
5. Speed
2. Highlight the desired Speed Dial position, or enter the Speed Dial digit, then
press the OK Key [SET].
3. Select the desired Contact entry, then press the OK Key.
4. Highlight the number you wish to set to speed dial then press the OK Key.
5. "ASSIGN SPEED DIAL TO
Highlight
"Unassigned" appears if the location is available.
TO ERASE A SAVED SPEED DIAL
1. From the home screen, press the
5. Speed
2. Select the Speed Dial entry you want to erase.
3. Press the Right Soft Key
up or down to highlight a desired contact or contacts, then press the
[Done] when you have finished
[Options] to select from the following:
Save As Draft, Insert Quick Text, Priority
Remove Name Card or Cancel Message.
[MENU], then press
Dials.
CONTACT?" appears on the screen.
Yes and press the OK Key. A confirmation message appears.
[MENU], then select
Dials.
[Remove].
down.
01
02
Level, Remove
03
04
05
06
07
3. Contacts,
3. Contacts,
51