Speed Dials; In Case Of Emergency - Pantech Verizon TXT8035PP User Manual

These options will vary depending on the message contents chosen.
10. To send the Voice Message, press the OK Key [SEND] or press the SEND Key .

SPEED DIALS

From idle mode, calls can be placed to numbers stored in speed dials, and pressing &
holding the location number on the keypad.
1. From idle mode, press the
5. Speed Dials.
2. Highlight the desired Speed Dial position, or enter the Speed Dial digit, then
press the OK Key [SET].
3. Select the desired Contact entry, then press the OK Key.
4. Highlight the number you wish to set to speed dial then press the OK Key.
5. "ASSIGN SPEED DIAL TO CONTACT?" appears on the screen. Select
press the OK Key. A confirmation message appears.
"Unassigned" appears if the location is available.
TO ERASE A SAVED SPEED DIAL
1. From idle mode, press the
5. Speed Dials.
2. Select the Speed Dial entry you want to erase.
3. Press the Right Soft Key
4. "REMOVE SPEED DIAL?" appears on the screen. Select
Key. A confirmation message appears.
54
[MENU], then select 3. Contacts,
Yes
[MENU], then select 3. Contacts,
[Remove].
Yes and press the OK

IN CASE OF EMERGENCY

Your phone has a special menu to organize your emergency contacts and personal
information.
TO ASSIGN EMERGENCY CONTACTS
Follow the procedures below to register a Contact to be contacted in case of emergency,
or to register a medical record number or other personal info. To register up to three
different Contacts to ICE:
1. From idle mode, press the
of Emergency.
Shortcut:
of Emergency
2. Select Contact
and
3. To select a contact from the Contacts List, press
the Contact entry, and then press the OK Key. To add a new contact as an ICE
CONTACT, press
[SAVE].
4. The Contact name will be displayed in the place of
Contact
TO RE-ASSIGN EMERGENCY CONTACTS
1. From idle mode, press the
of Emergency.
2. Select the contact you want to re-assign, press the Right Soft Key
[Options], then select
3. To select a contact from the Contacts List, press
Contact entry, and then press the OK Key. To reassign a new contact as an ICE
CONTACT, press
4. A confirmation message appears.
[MENU], then select
From idle mode, press the Right Soft Key
and press the OK Key [VIEW].
1, Contact 2 or Contact 3, then press the OK Key [ADD].
1. From
2. New Contact, enter the info, and then press the OK Key
3.
[MENU], then select
1. Re-assign.
1. From
2. New Contact, enter the info then press the OK Key [SAVE].
01
02
03
04
3. Contacts, 6. In Case
05
[Contacts], then select In Case
06
07
Contacts, select
Contact 1, Contact 2 or
3. Contacts, 6. In Case
Contacts, select the
55