Table of Contents
Advertisement
SPEED DIALS
From idle mode, calls can be placed to numbers stored in speed dials by sliding the
phone up, and pressing & holding the location number on the keypad.
1. Slide the phone up, press the
5. Speed
Dials.
2. Highlight the desired Speed Dial position, or enter the Speed Dial digit, then
press the OK Key [SET].
3. Select the desired Contact entry, then press the OK Key.
4. Highlight the number you wish to set to speed dial then press the OK Key.
5.
"ASSIGN SPEED DIAL TO
CONTACT?" appears on the screen. Select
press the OK Key. A confirmation message appears.
"Unassigned" appears if the location is available.
TO ERASE A SAVED SPEED DIAL
1. Slide the phone up, press the
5. Speed
Dials.
2. Select the Speed Dial entry you want to erase.
3. Touch the Right Soft Key
4.
"REMOVE SPEED
DIAL?" appears on the screen. Select
Key. A confirmation message appears.
IN CASE OF EMERGENCY
Your phone has a special menu to organize your emergency contacts and personal
information.
TO ASSIGN EMERGENCY CONTACTS
Follow the procedures below to register a Contact to be contacted in case of emergency,
or to register a medical record number or other personal info. To register up to three
different Contacts to ICE:
54
[MENU], then press
3.
Contacts,
Yes
[MENU], then press
3.
Contacts,
[Remove].
Yes
and press the OK
1. Slide the phone up, press the
of
Emergency.
Shortcut:
[Contacts], then select
2. Select
Contact
3. To select a contact from the Contacts List, press
the Contact entry, and then press the OK Key. To add a new contact as an ICE
CONTACT, press
[SAVE].
4. The Contact name will be displayed in the place of
and
Contact
TO RE-ASSIGN EMERGENCY CONTACTS
1. Slide the phone up, press the
of
Emergency.
2. Select the contact you want to re-assign, touch the Right Soft Key
[Options], then press
3. To select a contact from the Contacts List, press
Contact entry, and then press the OK Key. To reassign a new contact as an ICE
CONTACT, press
4. A confirmation message appears.
TO UNASSIGN EMERGENCY CONTACTS
1. Slide the phone up, press the
of
Emergency.
2. Select the contact you want to unassign, then touch the Right Soft Key
[Options].
3. Press
2.
4. A confirmation message appears.
[MENU], then press
From idle mode, slide the phone up and touch the Right Soft Key
In Case of Emergency
and press the OK Key [VIEW].
1,
Contact 2
or
Contact
3, then press the OK Key [ADD].
2. New
Contact, enter the info, and then press the OK Key
3.
[MENU], then press
1.
Re-assign.
2. New
Contact, enter the info then press the OK Key [SAVE].
[MENU], then press
Unassign.
3.
Contacts,
6. In Case
01
02
1. From
Contacts, select
03
04
05
Contact
1,
Contact 2
or
06
07
3.
Contacts,
6. In Case
1. From
Contacts, select the
3.
Contacts,
6. In Case
55
Advertisement
Table of Contents
