Sounds Settings - Pantech Verizon Jest 2 User Manual

• Vibrate: Press the Directional Key
Key [SET].
• Reminder: Press the Directional Key
15 minutes or Off, then press the
EMERGENCY TONE
1. Slide the phone up, press the
9. Settings & Tools, 5. Sounds
4. Emergency Tone.
2. Select Alert, Vibrate or Off, then press the
3. To view the help for Emergency
KEYPAD SOUNDS
To select keypad sounds when using the QWERTY Keypad.
1. Slide the phone up, press the
5. Sounds Settings, 4. Keypad
2. Select DTMF, Cloud or Simple, then press the
DTMF is the default setting for this device.
KEYPAD VOLUME
To set the keypad volume:
1. Slide the phone up, press the
9. Settings & Tools, 5. Sounds
2. Adjust the volume by pressing the Directional Key
the Key [SET] to save the setting. To test the volume level, press the Left
Soft Key [Play].
DIGIT DIAL READOUT
The Digit Dial Readout setting controls if digits are read out loud when you enter a
phone number with the QWERTY Keypad.
90
up or down to select On or Off, then press the
up or down to select Once, Every 2 minutes/Every
Key [SET].
Key [MENU], then press
Settings, 3. Alert Sounds,
Key [SET].
Tone, press the Left Soft Key [Help].
9. Settings &
Key [MENU], then press
Sounds.
Key [SET].
Key [MENU], then press
Settings, 5. Keypad Volume.
up or down, then press
1. Slide the phone up, press the
5. Sounds
2. Select On
SERVICE ALERTS
To set any of the three Alert options to either On or Off:
1. Slide the phone up, press the
5. Sounds
2. Select one of the following options, then press the
• ERI: The Enhanced Roaming Indicator (ERI) feature displays a text banner on the display screen
informing the handset user of which systems the wireless device is using as compared to the
service plan they purchased. The ERI Banner text changes to tell a customer if they are using
the Verizon Wireless Network, Extended Network or Roaming.
Minute Beep: Alerts you every minute during a call.
•
Tools,
• Call Connect: Alerts you when the call is connected.
• Software Update: Alerts you when a software update is available.
3. Select On
DEVICE CONNECT
Allows you to turn the Device Connect On or Off:
1. Slide the phone up, press the
5. Sounds
On
2. Select
POWER ON/OFF
To set the phone to sound a tone when the phone is powered on or off:
1. Slide the phone up, press the
5. Sounds
1. Power On
2. Press
3. Select On
Key [MENU], then press
Settings, 6. Digit Dial Readout.
or Off, then press the Key [SET].
Key [MENU], then press
Settings, 7. Service Alerts.
or Off, then press the Key [SET].
Key [MENU], then press
Settings, 8. Device Connect.
or Off, then press the
Key [SET].
Key [MENU], then press
Settings, 9. Power On/Off.
2. Power Off.
or
or Off, then press the Key [SET].
9. Settings & Tools,
01 01
02 02
9. Settings & Tools,
03 03
04 04
Key.
05 05
06 06
07 07
9. Settings & Tools,
9. Settings & Tools,
90 91