Display - EverFocus PARAGON960 X4 User Manual

4.4 Display

You can display system and camera status on the live view screen. Follow the steps below:
1. Click the Display button
front panel to display the system and camera status. Click the button to choose the desired
display mode:
2. The following icons will be displayed at the top-left side of each camera stream to show each
camera's status.
Recording
Alarm
3. The following icons will be displayed at the bottom of the monitor to show the system
status.
Audio On
No network 1
HDD failure
4. There are four display modes, and you can click the Display button to change the display
mode: (1) Display both the camera and system status icons. (2) Display only the camera
status icons. (3) Display only the system status icons. (4) Hide both the camera and system
status icons.
on the OSD Root Menu or press the Display button on the
Playback Fast forward
Motion Video loss
Audio Off
No Network 2
HD temp. too
high
Fast backward
Uninstall
Alarm Motion
Main Call
Event
42
PARAGON960 X4
Back pause
Audio On
Video loss
Sequence