EverFocus PARAGON960 X4 User Manual page 110

3. Select desired time bar for setting: Use the Jog wheel to select a time bar and press the
Enter button. The selected time bar will be highlighted with a red frame, and the first
block of this bar will be selected (highlighted in yellow frame).
4. Editing blocks in a time bar: Use the Shuttle wheel to select the desired block as the
starting time, and press the Enter button to confirm. At this time, the current and all
following blocks will turn into gray, which means this gray timezone has been set to the
recording mode of gray (No Rec). User can also change the timezone to a different record
mode (with different color) by following the instructions in the next step.
5. Changing recording mode (color) of a timezone: Use the Shuttle wheel to switch to the
first block (with number on it) of a timezone. Press the Enter button, this timezone will
switch to another color, which means switching to another record mode. The color
switch sequence is gray->pink->blue-green.
6. To exit the screen, press the "Menu/Esc" button as required to move up the menu levels
and, if desired, out of the menu system.
Figure 6-37
Figure 6-38
Figure 6-39
102
PARAGON960 X4