EverFocus PARAGON960 X4 User Manual page 18

5. Push the Rubber Spacer into the bottom slot of Bracket.
Rubber Spacer
Figure 2-4
6. Insert Black Long Screws into the Rubber Spacers.
Figure 2-5
7. Use the SATA Cable, and connect one end to the SATA port on the small PCB inside the DVR,
and the other end to the SATA port on the HDD.
Figure 2-6
8. Connect the internal power cable to the HDD.
Figure 2-7
Note: The internal power cable is connected to the Main board inside the DVR. The power cable
features two connectors, which can be used to connect to two HDDs.
Bracket
Black Long
Screw
10
PARAGON960 X4