Browser Security Setting; Installing Activex Controls - EverFocus PARAGON960 X4 User Manual

7.2 Browser Security Setting

7.2.1

Installing ActiveX Controls

Follow the steps below to install the ActiveX Controls and JAVA Runtime when you first
connect to the DVR's IP address. If you do not see the following dialog (Figure 7-2), your
security settings may be too high. If so, go to "Section 7.2.2 Enabling ActiveX Controls."
1. When first connecting to the DVR's IP address, the following dialog will show up if you
didn't install the JAVA software or its latest version on your computer.
2. Please click OK to go to the JAVA website http://www.java.com/en/, and download the
latest version of the JAVA software.
3. After installation is completed, connect the DVR's IP address again and the ActiveX yellow
bar may pop up on the top of the window. Please click it to run the JAVA application.
4. If there is an alert dialog popping up, go to the Control Panel > JAVA Control Panel. Click
Advanced tap on the top of the window, and scroll to "Mixed code (sandboxed vs. trusted)
security verification", and select the Enable – hide warning and run with protections.
Figure 7-2
Figure 7-3
118
PARAGON960 X4