Basic Connection - EverFocus PARAGON960 X4 User Manual

2.3 Basic Connection

The instructions below the figure describe the basic connection for the PARAGON960 X4.
1
Mouse
Main Monitor
(HDMI)
1. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control keys on the front panel.
2. Using the supplied Power Cord, connect one end to the
the other end to the
Note: Please ensure to connect the internal power cables to the internal HDDs before
powering on the DVR.
3. Connect the cameras to the DVR using the coaxial cables. 700TVL cameras are recommended.
4. Connect the line level audio input devices to the DVR.
5. To view videos, connect a monitor to the HDMI, VGA or BNC port using the HDMI, VGA or
BNC cable supplied by the monitor manufacturer.
6. Use a standard RJ-45 cable to connect the DVR to the network for using EverFocus' CMS.
7. To listen to audio of video source, connect speakers to the Audio Out port. Note that
speakers with amplifier are required.
Front View
2
Rear View
Power Supply
5
Main Monitor Call Monitor
(VGA) (BNC)
Figure 2-12
100-240 VAC~ power outlet.
3
Analog Camera 1~16
6
Network
Web Remote PowerVideo Plus
Client (CMS)
100-240 VAC~
13
PARAGON960 X4
4
Line Level Audio In 1~4
7
Line Level
Audio Out
port on the DVR and