Clutch Lever - Yamaha XT1200ZE Owner's Manual

Select switch " / "
This switch is used to perform selec-
tions in the function display and setting
mode display of the multi-function me-
ter unit.
See "Multi-function meter unit" on
page 3-10 for detailed information.
Drive mode switch "MODE"
WARNING
Do not change the D-mode while the
vehicle is moving.
Using this switch changes the drive
mode to touring mode "T" or sports
mode "S".
The throttle grip must be completely
closed in order to change the drive
mode.
The selected mode is shown on the
drive mode display. (See page 3-12.)
The drive mode cannot be changed
while the cruise control system is oper-
ating.
INSTRUMENT AND CONTROL FUNCTIONS
EAU54221

Clutch lever

4
EAU54691
EWA15341
1. Clutch lever
2. Clutch lever position adjusting dial
3. Arrow mark
4. Distance between clutch lever and handle-
bar grip
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the han-
dlebar grip. To engage the clutch, re-
lease the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch lever position adjusting dial. To
adjust the distance between the clutch
lever and the handlebar grip, turn the
adjusting dial while holding the lever
pushed away from the handlebar grip.
Make sure that the appropriate setting
EAU12831
on the adjusting dial is aligned with the
arrow mark on the clutch lever.
1
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-43.)
2
3
3-26
3