Yamaha XT1200ZE Owner's Manual page 33

This function allows you to
check and reset the
"TIME–2" and "TIME–3"
functions. These time trips
show the total elapsed
time that the key has been
in the "ON" position. When
the key is turned to "OFF",
"Time Trip"
the time trips stop count-
ing but are not reset. The
maximum time that can be
shown is 99:59.
When the time trips reach
99:59, they automatically
reset to 0:00 and continue
counting.
This function allows you to
switch the fuel consump-
tion units between
"L/100km" and "km/L".
For the UK only: This func-
tion allows you to switch
"Unit" the display units between
kilometers and miles.
When kilometers are se-
lected, the fuel consump-
tion units can be switched
between "L/100km" and
"km/L".
This function allows you to
"Display" change the items shown in
3 information displays.
This function allows you to
adjust the brightness of
"Brightness" the multi-function meter
unit panel to suit the out-
side lighting conditions.
INSTRUMENT AND CONTROL FUNCTIONS
This function allows you to
"Clock"
set the clock.
This function allows you to
"All Reset" reset all items, except the
odometer and the clock.
Adjusting the temperature levels of the
grip warmer settings
1. Use the select switch to highlight
"Grip Warmer".
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the menu switch "MENU".
The grip warmer setting display
will be shown and "High" will flash
in the display.
3-18
Grip Warmer
Hi g h
10
Middle
5
Low
1
3. Push the menu switch "MENU".
The temperature level for the high
setting will start flashing.
Use the select switch to set the
temperature level, and then push
the menu switch "MENU". "High"
will start flashing.
Grip Warmer
Hi g h
10
Middle
5
Low
1
3