Yamaha XT1200ZE Owner's Manual page 31

 The accuracy of the temperature
reading may be affected when rid-
ing slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.
Coolant temperature display:
C.TEMP
Lo
The coolant temperature display indi-
cates the temperature of the coolant.
The coolant temperature varies with
changes in the weather and engine
load.
If the message "Hi" flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 6-39.)
INSTRUMENT AND CONTROL FUNCTIONS
GEAR
4
C.TEMP
˚C
TIP
The selected information display can-
not be switched while the message
"Hi" is flashing.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption display:
FUEL AVG
The average fuel consumption display
modes "km/L", "L/100km" or "MPG"
(for the UK only) show the average fuel
consumption since the display was last
reset.
 The "km/L" display shows the av-
˚C
Hi
 The "L/100km" display shows the
 For the UK only: The "MPG" dis-
ECA10022
To reset the average fuel consumption
display, use the select switch to select
the information display that contains
the average fuel consumption display.
Push the "RESET" button briefly so
that the average fuel consumption dis-
play flashes, and then push the "RE-
km/L
SET" button again for at least 2
12.3
seconds while the display is flashing.
3-16
erage distance that can be trav-
eled on 1.0 L of fuel.
average amount of fuel necessary
to travel 100 km.
play shows the average distance
that can be traveled
1.0 Imp.gal of fuel.
3
on