Yamaha XT1200ZE Owner's Manual page 53

 Changing the preload setting will
also adjust the front and rear sus-
pension damping forces accord-
ingly. See "Damping force" on
page 3-40 for more information.
 About cold temperature opera-
tion:
• When using the preload adjust-
ing function, there should be no
weight on the vehicle.
• When using the preload adjust-
ing function at ambient temper-
atures near or below 0 °C (32
°F), to protect the preload ad-
justing function motor, the elec-
tronically adjustable suspension
system warning light may come
on.
• The suspension will still operate
as normal, only the preload ad-
justing function cannot be used.
• To reset the electronically ad-
justable suspension
warning light, wait approximate-
ly 6 minutes and then turn the
key to "OFF" or immediately
turn the key to "OFF" and then
wait 6 minutes.
INSTRUMENT AND CONTROL FUNCTIONS
• If the electronically adjustable
suspension
light remains
Yamaha dealer check the sus-
pension system.
To adjust the preload
1. Turn the key to "ON", start the en-
gine, and then shift the transmis-
sion into neutral.
2. Push the menu switch "MENU" to
switch the function display to the
preload adjusting function.
GEAR
N
system
1. Function display
2. Preload adjusting function
3. Preload setting pictogram
system warning
on, have a
1. Menu switch "MENU"
2. Select switch "
3. Use the select switch to select the
1
2
3
3-38
1
2
/ "
desired preload setting pictogram.
Select the suitable setting from
the following 4 pictograms ac-
cording to your load condition.
3