Troubleshooting - Yamaha XT1200ZE Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Auxiliary light bulb
8. Insert a new bulb into the socket.
9. Install the socket (together with
6
the bulb) by pushing it in and turn-
ing it clockwise.
10. Install the headlight unit by install-
ing the bolts, and then tightening
them to the specified torque.
Tightening torque:
Headlight unit bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
11. Install the headlight unit cover by
installing the bolts.
12. Install the panel by installing the
screws and the quick fastener
screw.
13. Install the cover.
1
14. Install the windshield by installing
the screws, and then tightening
them to the specified torque.
WARNING! A loose windshield
could cause an accident. Be
sure to tighten the screws to the
specified torque.
Tightening torque:
Windshield screw:
0.5 Nm (0.05 m·kgf, 0.36 ft·lbf)

Troubleshooting

Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
[EWA15511]
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the ar-
ea, including pilot lights from water
6-36
WARNING
EAU25872
EWA15142