Yamaha XT1200ZE Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
Automatic deactivation of the cruise
control system
The cruise control system for this mod-
el is electronically controlled and is
linked with the other control systems.
The cruise control system will auto-
3
matically become deactivated under
the following conditions:
 The cruise control system is not
able to maintain the set cruising
speed.
 Wheel slip or wheel spin is detect-
ed. (If the traction control system
has not been turned off, the trac-
tion control system will work.)
 The start/engine stop switch is set
to the " " position.
 The engine stalls.
 The sidestand is lowered.
When traveling with a set cruising
speed, if the cruise control system is
deactivated under the above condi-
tions, the " " indicator light will go off
and the "SET" indicator light will flash
for 4 seconds, and then go off.
When not traveling with a set cruising
speed, if the start/engine stop switch is
set to the " " position, the engine
stalls, or the sidestand is lowered, then
the " " indicator light will go off (the
"SET" indicator light will not flash).
If the cruise control system is automat-
ically deactivated, please stop and
confirm that your vehicle is in good op-
erating condition.
Before using the cruise control system
again, activate it using the power
switch.
TIP
In some cases, the cruise control sys-
tem may not be able to maintain the set
cruising speed when the vehicle is
traveling uphill or downhill.
 When the vehicle is traveling up-
hill, the actual traveling speed may
become lower than the set cruis-
ing speed. If this occurs, acceler-
ate to the desired traveling speed
using the throttle.
 When the vehicle is traveling
downhill, the actual
speed may become higher than
the set cruising speed. If this oc-
curs, the setting switch cannot be
used to adjust the set cruising
speed. To reduce the traveling
3-9
speed, apply the brakes. When
the brakes are applied, the cruise
control system will become deac-
tivated.
Self-diagnosis device
1 2
1. Cruise control system indicator light "
2. Cruise control setting indicator light "SET"
3. Engine trouble warning light "
4. Error code display
The cruise control system will also be-
come deactivated when an irregularity
with any of the vehicle systems is de-
traveling
tected. The "SET" indicator light will go
off and the "
flash. You will not be able to use the
cruise control system while the engine
GEAR
N
A.TEMP ˚C
25
C.TEMP ˚C
Lo
TIME TRIP
0:00
3 4
"
"
" indicator light will