Interface Control - OKIDATA Pacemark 4410 Service Manual

Page: 10
Service Guide for PM4410
Chapter 2 Operation

2.1.4 Interface Control

The PM4410 is provided with the centronics parallel interface and RS-232C serial interface as standard features. Also it
can be connected to option OKI HSP or Opt. Card. The interface cable can be connected simultaneously with these
interfaces.
These interfaces can be switched with the menu switch on the operation panel, in addition, you can designate
auto-select for them. The MPU communicates with hosts through the NHDC according to the selected interface mode.
The selected interface is stored to the EEPROM and can maintain even after powering the printer off.
Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)