Address (Id); Setting The Address (Id) - Bosch VEZ Series Installation And Configuration Manual

8

Address (ID)

6 Address (ID)
Each AutoDome Easy camera must have a unique address (ID). When installing multiple dome
cameras using a DVR, it is suggested that the dome camera address match the DVR input num-
ber (for example: Input 1 = Dome 1, Input 2 = Dome 2, etc...). Set a unique camera address
(ID) using the switch selections inside the bubble.
6.1

Setting the Address (ID)

To set the unique AutoDome Easy ID address, do the following:
1.
2.
3.
4.
Fig. 6.1 Setting the AutoDome Easy Address (ID)
December 06, 2006 | F01U074570 | 3.0
Loosen the bubble's four (4) tamper-resistant screws using the torx wrench provided.
Carefully lift the bubble and set it aside.
Locate the SW501 switch.
Set the switches based on Table 6.1.
Installation and Configuration Manual
AutoDome Easy
Bosch Security Systems, Inc.