Pro-Form CLUB DESIGN 1000 User Manual page 19

HOW TO CONNECT YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 18.
A. Plug one end of a long 1/8" to RCA stereo audio
cable (available at electronics stores) into either
jack on the console. Plug the other end of the
cable into the AUDIO OUT jack on your VCR.
A
Audio Cable
B. Plug one end of a long 1/8" to RCA stereo audio
cable (available at electronics stores) into either
jack on the console. Plug the other end of the
cable into an RCA Y-adapter (available at electron-
ics stores). Next, remove the wire that is currently
plugged into the AUDIO OUT jack on your VCR
and plug the wire into the unused side of the Y-
adapter. Plug the Y-adapter into the AUDIO OUT
jack on your VCR.
B
ANT. IN
VIDEO AUDIO
IN
RF OUT
CH
3 4
OUT
AUDIO OUT
RIGHT
LEFT
19
VIDEO AUDIO
IN
CH
3
OUT
RCA
Y-adapter
Audio Cable
Wire removed from
AUDIO OUT jack
ANT. IN
RF OUT
4