Pro-Form CLUB DESIGN 1000 User Manual page 18

HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of a long 1/8" to RCA stereo audio
cable (available at electronics stores) into either
jack on the console. Plug the other end of the
cable into the LINE OUT jack on your stereo.
Note: While the cable is plugged into the LINE
OUT jack, do not plug your headphones into the
other jack on the console.
A
B. Plug one end of a long 1/8" to RCA stereo audio
cable (available at electronics stores) into either
jack on the console. Plug the other end of the
cable into an RCA Y-adapter (available at electron-
ics stores). Next, remove the wire that is currently
plugged into the LINE OUT jack on your stereo
and plug the wire into the unused side of the Y-
adapter. Plug the Y-adapter into the LINE OUT
jack on your stereo. Note: While the Y-adapter is
plugged into the LINE OUT jack, do not plug your
headphones into the other jack on the console.
B
Audio
Cable
Wire removed from
LINE OUT jack
CD
VCR
Amp
LINE OUT
LINE OUT
Audio Cable
CD
VCR
Amp
LINE OUT
RCA
Y-adapter
HOW TO CONNECT YOUR COMPUTER
A. Plug one end of a long 1/8" to 1/8" stereo audio
cable (available at electronics stores) into either
jack on the console. Plug the other end of the
cable into the LINE OUT jack on your computer.
Note: While the cable is plugged into the LINE
OUT jack, do not plug your headphones into the
other jack on the console.
A
18
LINE OUT
Audio Cable