Cutting Unit; Lift Lever For Cutting Unit - Husqvarna 155 Operator's Manual

Cutting unit

The Rider 155 can be fitted with four different
cutting units.
BioClip - 900 mm/36"
Combi - 1120 mm/44"
Combi - 1030 mm/41"
See "Maintenance \ Checking the Blades" for
identification of the cutting unit.
Lift lever for the cutting unit
The lift lever is used to set the cutting unit in trans-
port or cutting position.
If the lever is pulled back the unit will lift up and the
blades will automatically stop rotating (transport
position).
If the lock button is pressed and the lever is moved
forward the unit will be lowered and the blades will
automatically start rotating (cutting position).
The lever can also be used to temporarily regulate
the cutting height, e.g. for a small mound in the
lawn.
16
– English
PRESENTATION
Lifting of the cutting unit (transport position)
Lowering of the cutting unit (cutting position)
6017-214
6004-011H
6004-012H