Driving The Machine - Husqvarna 155 Operator's Manual

Driving the machine

1. Release the parking brake by pressing down the
parking brake pedeal and then releasing it.
2. Carefully press down one of the pedals until the
correct speed is reached.
To drive forwards: press down pedal (1).
To reverse: press down pedal (2).
3. Select the required cutting height (1-9) with the
cutting height lever.
To obtain a uniform cutting height it is important
that the tyre pressures are equal on both front
wheels 60 kPa/8.5 PSI.
20
– English
DRIVING
2
1
6017-012
6017-214A
6007-008H