These symbols are on the machine and in the operator's manual.
N
Neutral
Fast
Oil level
Cutting height
Hydrostatic free wheel
Never use the machine if persons, especially
children, or animals, are in the vicinity.
Keep hands and feet away from
moving parts.
STARTING INSTRUCTION
• READ OPERATOR´S MANUAL.
• CHECK ENGINE OIL LEVEL.
• ENGAGE PARKING BRAKE AND LIFT
CUTTING DECK IN TRANSPORT POSITION.
•
IF ENGINE IS COLD USE CHOKE.
• START THE ENGINE.
• RELEASE PARKING BRAKE BEFORE DRIVING.
INSTRUCTIONS DE DEMARRAGE
• LIRE LE GUIDE DE CONDUITE.
• VÉRIFIEZ LE NIVEAU D´HUILE MOTEUR.
• SERREZ LE FREIN DE PARKING ET METTRE LE CARTER
DE COUPE EN POSITION HAUT.
• SI LE MOTEUR EST FROID, UTILISEZ LE STARTER.
• ACTIONNEZ LE DÉMARREUR.
• DESSERREZ LE FREIN DE PARKING
6
– English
EXPLANATION OF SYMBOLS
Study them carefully so that you know what they mean.
Read the operator's manual
Slow
Backwards
Use eye and hearing protection
Never carry passengers on the
machine or equipment.
Engine off
Choke
Forwards
Parking brake
Warning!
Risk that the
machine can tip over
Fuel
Ignition
Warning
Never drive across a
slope
Drive very slowly
without the cutting unit.
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance