Husqvarna 155 Operator's Manual page 21

Warm engine:
4. Set the throttle control midway between position
1 and 2.
5. Turn the ignition key to start position.
IMPORTANT INFORMATION
Do not run the starter for more than about
10 seconds at a time. If the engine does
not start, wait about 60 seconds before
trying again.
6. When the engine has started release the ignition
key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated
areas. The exhaust fumes contain
toxic carbon monoxide.
DRIVING
1
2
STOP START
STOP START
3
6007-005H
6007-006
6007-007
19
English –