Removing The Cutting Unit - Husqvarna 14 Pro Operator's Manual

Removing the cutting unit

1. Apply the parking brake, see page 10.
2. Adjust the cutting height to its lowest setting.
3. Remove the front hood, as described on page
18.
4. Fit the support wheels.
!
WARNING!
Wear protective glasses when
removing the cutting unit. The
spring which tensions up the belt
can go off and cause personal
injury.
5. Relieve the tensioning wheel by disconnecting
the spring.
6. Lift the drive belt off the cutting unit drive pulley.
7. Pull out the pin.
MAINTENANCE
27
English –