Lever For Adjustment Of Cutting Height; Parking Brake; Seat; Fuelling - Husqvarna 14 Pro Operator's Manual

Lever for adjustment of the cutting
height
The cutting height can be adjusted to 9 different
positions with the cutting height lever.
Cutting unit with side/rear ejector,
BioClip cutting unit,

Parking brake

The parking brake is applied as follows:
1. Push down the brake pedal (1).
2. Push in the lock button on the steering column
(2).
3. Release the brake pedal while holding the
button pressed.
The parking brake lock disengages automatically
when the brake pedal is pressed.

Seat

The seat has a jointed attachment on the front edge
and can be tipped forward.
The seat can also be adjusted lengthways.
To adjust move the lever under the front edge of the
seat to the left, so that the seat can be moved
forward or backwards to the required position.

Fuelling

The engine should be run on 85 octane (or higher)
unleaded petrol/gasoline (no added oil). Environ-
mentally adapted alkylate fuel, such as Aspen, is
also recommended.
!
WARNING!
Petrol is highly inflammable. Exercise
care and refuel outdoors (see safety
instructions).
12
– English
PRESENTATION
40-90 mm.
45-95 mm.
2
1