Driving; Before Starting; Starting The Engine - Husqvarna 14 Pro Operator's Manual

Before starting

• Read the safety instructions and information on
the location and function of the controls before
starting (see pages 5–12).
• Conduct daily maintenance before starting (see
maintenance schedule on page 17).
• Adjust the seat to the required position.

Starting the engine

1. Lift up the cutting unit by pulling the lever back-
wards to locked position (transport position) and
apply the parking brake.
2. Move the throttle control to the middle position.
3. If the engine is cold move the choke lever
backwards to its end position.
4. Turn the ignition key to the start position.

DRIVING

13
English –