Connecting To Equipment With Video Output Terminal - Hitachi UT32-MH700A User Manual

2.
With "HDMI Control" function, you can interface the connected equipment through the HDMI terminal automatically
if the connected equipment meets an industry standard "HDMI CEC (Consumer Electronics Control)". Please check
if the connected equipment supports HDMI CEC before using this function.
1. Press the button.
2. Select "Function" menu.
3. Select "HDMI Control".
4. Select "Auto Input Change" or "System Standby".
Auto Input Change
System Standby
NOTE
If an HDMI-DVI cable is used, this HDMI-interfaced system is not available.
The unit can be connected to equipments having video output using the optional D-sub 15 pin - composite cable.
NOTE
About the connection of D-sub 15 pin, see
About switching between RGB and Composite input, refer to
15
Condition : while the monitor is in Standby mode.
Off
When the connected equipment starts (such as DVD
playback and Disc insertion), the monitor is automatically
On
turned On and switches the picture and audio to HDMI input.
Condition : while the monitor is On.
Off
When the monitor is switched off or set to Standby mode, the
On
connected equipment is also turned off or in Standby mode.
IN
AUDIO
(Audio)
*
(D-sub 15 Pin)
* Optional D-sub 15 pin - composite
cable.
for details .
9
or
for details.
17
Function
HDMI Control
Auto Input Change Off
System Standby Off
Select Return Exit
OUT [Example]
VCR
DVD player
Set-Top Box
Camcorder
Home video game system