Main Unit Installation; Anti-Tumble Measures - Hitachi UT32-MH700A User Manual

Main Unit Installation

and maintain safety.
We assume no responsibility nor liability for personal injuries or property damage caused by use of other mounting
units or improper installation.
With respect to installation instructions, please read each user manual for the respective mounting units: for
Desktop Setup, Wall Mounting, and Ceiling Mounting.
If using Wall or Ceiling Mounting units, contact your local dealer and ask for an approved installation specialist to
set up the unit. Never attempt to install it yourself. That could cause injury or damage.
Please make sure that there is adequate space around
the unit to prevent overheating.
Make sure not to block any ventilation holes.
Do not install the unit in a small space such as inside a
cabinet, closet or box.
Leave at least 10cm of clearance from each side of the
unit and 30cm from the top of the unit to ceiling.
Install in a stable location and take safety precautions to ensure that the set does not fall.
1
Remove the plastic rivet.
NOTE
For more information regarding mounting of the unit, please contact your dealer.
Please install the unit in a proper location where it does not expose anyone to the danger of bumping themselves
(for example their hands, head or face, etc) against the edges of the unit and causing personal injury.
7
Plastic rivet
Fastening strap
30cm
or more
10cm
or more
Fasten the fastening strap to a table using
2
the wood screw provided.
10cm
or more
10cm
or more
Wood screw
(4 x 20 screw) : 1 pc.
10cm
or more