Advanced Setting - Hitachi UT32-MH700A User Manual

Select "Setup" from the Menu list.
Video Power Save
RGB Input
Color System
Watching through the optional D-sub 15 pin - composite cable
NOTE
If your external equipment does not have an HDMI terminal or a DVI terminal,
you can watch images from your external equipment through the optional D-sub 15 pin - composite cable.
1. Connect to your external equipment with the optional D-sub 15 pin - composite cable. (See
2. Switch to RGB input by pressing the
3. Press the
4. Select "Composite" in "RGB Input".
Checking software version
NOTE
The software version is displayed on Setup (HDMI/Composite) menu.
27
Composite
NTSC 4.43
NTSC 3.58
button and select "Setup" from the menu list.
Off
See 32 for details.
On
RGB
Select the effective signal.
Auto
PAL
Selects the color system depending on the input signal.
SECAM
Generally, select [Auto] to receive all signals.
If the input signal has too much noise, the signal level is
too low or the operation is unstable in [Auto], select the
system according to the color system of the input signal.
PAL60
Composite input only.
PAL-M
PAL-N
or button.
Software version
Setup
Video Power Save
RGB Input
Color System
Select On/Off
[Example]
Setup hint
.)
15
Setup
Video Power Save Off
RGB Input Composite
Color System Auto
Select On/Off
VC143-141 06-0
[Example]
Off
Composite
Auto
Return
VC143-141 06-0
Return