Function; Size Switching; Hdmi/Composite Signal Input; Display Size - Hitachi UT32-MH700A User Manual

FUNCTION

Each time the button of the remote control is pressed, the screen display size is
switched in sequence, and the status will be displayed at the bottom of the screen.

Display Size

4:3 Panoramic 1
Full
Full 1 Full 2
You can display the image at its optimum condition by selecting display size depending on the current output image
as shown below.
Display
(4:3 Signal)
(Vista)
(Cinema)
(Squeeze)
(16:9 Signal)
(4:3 Image in
16:9 Frame)
Panoramic 2 Zoom 1
Zoom 2
Zoom
Display Size
Plays a 4:3 image on screen faithfully. Blanking occurs on
4:3
both sides.
Plays a 4:3 image which enlarges horizontal and vertical size of
Panoramic 1 the middle in equal scales, and displays both sides appearing
much wider.
The vertical size of Panoramic1 is reduced so that you can
Panoramic 2 see the whole image, including any subtitles, that might
otherwise not be fully visible on the screen.
Plays a 16:9 image in 4:3 frame (Vista size) faithfully.
Zoom 1 *In some cases, slight blanking may remain at the top and
bottom.
Plays a 21:9 image in 4:3 frame (Cinema size) expanding
vertically.
Zoom 2
*In some cases, slight blanking may remain at the top and
bottom.
Plays a 4:3 image faithfully in the standard vertical size and
Full
horizontally squeezed.
Full 1 Plays a 16:9 image faithfully showing 95% of the size.
Plays a 16:9 image faithfully showing 100% of the size.
Full 2 *In some cases, the screen display has unnecessary
blanking or noise at the edges.
Zoom
the 16:9 screen.
Size button
30