Connecting To Equipment Having Video Output Terminals - Hitachi Director’s UT32X812 Operating Manual

CONNECTION (continued)
2. Connect your Equipment to the Monitor (continued)
Connecting to Equipment Having a HDMI Output Terminal
HDMI-Interfaced System
With "HDMI Control" function, you can interface the connected equipment through the HDMI terminal automatically
if the connected equipment meets an industry standard "HDMI CEC (Consumer Electronics Control)". Please check
if the connected equipment supports HDMI CEC before using this function.
1. Press the
button.
2. Select "Function" menu.
3. Select "HDMI Control".
4. Select "Auto Input Change" or "System Standby".
Auto Input Change
System Standby
AV Center Control
NOTE
If the HDMI-DVI cable is used, this HDMI-interfaced system is not available.

Connecting to Equipment Having Video Output Terminals

The unit can be connected to equipments having video output using the optional D-sub 15 pin - composite cable.
NOTE
About the connection of D-sub 15 pin, see
19
Condition : while the monitor is in Standby mode.
Off
When the connected equipment starts (such as DVD
playback and Disc insertion), the monitor is automatically
On
turned On and switches the picture and audio to HDMI input.
Condition : while the monitor is On.
Off
When the monitor is switched off or set to Standby mode, the
On
connected equipment is also turned off or in Standby mode.
Off
Selecting On will activate AV Center OSD interface, in case
you purchased the optional Hitachi A/V Center.
On
IN
AUDIO
(Audio)
*
(D-sub 15 Pin)
* Optional D-sub 15 pin - composite
for details .
13
or
cable.
Function
HDMI Control
Auto Input Change Off
System Standby Off
AV Center Control On
Select Return Exit
[Example]
OUT
VCR
DVD player
Set-Top Box
Camcorder
Home video game system