Table of Contents
Advertisement
CONNECTION (continued)
2. Connect your External Equipment (if any) to the Unit (continued)
Connecting to Equipment with HDMI or DVI Output Terminal (continued)
HDMI-Interfaced System
With "HDMI Control" function, you can interface the connected equipment through the HDMI terminal automatically
if the connected equipment meets an industry standard "HDMI CEC (Consumer Electronics Control)".
1. Press the
button.
2. Select "Function" menu.
3. Select "HDMI Control".
4. Select "Auto Input Change" or "System Standby".
Auto Input Change
System Standby
NOTE
If an HDMI-DVI cable is used, this HDMI-interfaced system is not available.
There may be a slight operation delay (e.g. switch On/Off the monitor or the connected equipment) when using
this "HDMI Control" function.
Please check if the connected equipment supports HDMI CEC and ensure that this operation is activated in the
connected equipment before using this "HDMI Control" function.
Connecting to Equipment with Video Output Terminal
The unit can be connected to equipments having video output using the optional D-sub 15 pin - composite cable.
[Example: 32 inch model]
NOTE
27
Refer to
for details of switching between RGB and Composite input.
15
Condition: whilst the monitor is in Standby mode.
Off
When the connected equipment starts (such as DVD
playback and Disc insertion), the monitor is automatically
On
turned On and switches the picture and audio to HDMI input.
Condition: whilst the monitor is On.
Off
When the monitor is switched off or set to Standby mode, the
On
connected equipment is also turned off or in Standby mode.
IN
D-sub 15 pin
AUDIO
AUDIO
*Optional D-sub 15 pin - composite cable
Function
HDMI Control
OUT
*
or
Auto Input Change Off
System Standby
Off
Select
Return
Exit
[Example]
VCR
DVD player
Set-Top Box
Camcorder
Home video game system
Advertisement
Table of Contents
