Logging On - Nortel IP Phone 1110 User Manual

Logging on

Follow this procedure to log on to the network. If the Centrex IP Client
Manager (CICM) is set up as part of a group of CICMs, you can choose
which CICM to connect to. After you select a gateway, the terminal directs
itself at that CICM and the Username screen appears.
If a firmware upgrade for the IP Phone is available, the system prompts you
to upgrade when you log on. If the firmware level is between the minimum
and maximum level set by the administrator, Yes and No options appear on
the softkeys. If the terminal is below the minimum level, the only option
available is Yes. You cannot log on until you perform the upgrade.
To perform an upgrade, see
Step
1
2
3
4
5
Copyright © 2006 , Nortel Networks
.
Action
If the Selective Gateway Login feature is configured on your system,
press the down navigation key to scroll through the list to select the
gateway.
When the gateway you want appears, press Ok, or start entering
your user name.
If the Username screen appears when you start to enter your user
name, the characters you already entered appear at the beginning
of the Username field.
If you make a mistake, press Clear to clear the field, and then enter
the user name again.
If your user name is too long for the display (longer than 15
characters), the digits scroll to the left and an ellipsis appears to
the left of the username.
Press Ok, or press the send key.
The Password screen appears.
Enter your password. For security, the characters are displayed as
asterisks (*).
Carrier VoIP
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
"Performing a firmware upgrade" (page
21
62).
Nortel Networks Confidential