Resetting The Feature Keys To The Defaults; Labeling A Feature - Nortel IP Phone 1110 User Manual

Resetting the feature keys to the defaults

Follow this procedure to reset the keys to the default settings.
Step
1
2
3
4
5
6

Labeling a feature

Follow this procedure to change feature labels associated with softkeys.
Relabel Centrex feature labels through the Call Service menu, only. See
"Labeling soft keys" (page
If you are unfamiliar with how to use the dialpad to enter text, see
dialpad to enter text" (page 93)
Step
1
2
3
4
5
Copyright © 2006 , Nortel Networks
.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Call menu.
From the Call menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
Scroll through the list and select the feature key.
The Feature submenu appears.
Select and open Reset.
The Reset screen appears.
Press Yes, or press the send key.
The keys are reset to the default settings. You return to the Assign
menu.
45).
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Call menu.
From the Call menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
Scroll through the list and select the feature key.
The Feature submenu appears.
Select and open Label.
Carrier VoIP
Nortel IP Phone 1110 User Guide (CICM)
NN10300-021 1.0 Draft
(I)SN10 30 November 2006
Using the Assign menu 69
—End—
before you begin this procedure.
"Using the
Nortel Networks Confidential