Icom IC-735 Instruction Manual page 8

NEWLY DEVELOPED CPU INSTALLED
• VARIOUS SCANNING FUNCTIONS
Memory Scan allows monitoring of all different memory channels or
only those stored with a particular mode. Programmed Scan
provides scanning between any two programmed frequencies.
Auto-stop Scan functions when a signal is received in any mode.
Mode Selective Scan automatically monitors only those memories
which contain frequencies with the same mode.
• EASY-TO-READ DISPLAY
• 12 MEMORIES
The new liquid-crystal display with a soft, green illumination pro-
vides good operating frequency visibility even in sunlight, and also
indicates the VFO in use, operating mode, memory channel, split
mode and scan mode.
Twelve programmable memories are provided to store mode and
frequency, and the CPU is backed up by an internal lithium battery
to maintain the memories for up to five years. Scanning of fre-
quencies, memories and bands is possible from either the transceiver
or the IC-HM12 scanning microphone.
• ADVANCED REMOTE CONTROL SYSTEM
Full communications with a personal computer equipped with an
RS-232C jack is possible by using the serial port mounted on the
rear panel of the IC-735. The computer controls frequency, mode,
VFO A/B selection and memories when an appropriate interface is
used. The serial port uses a standard 1200 baud data rate.
OPTIONS AVAILABLE
• AT-150
The AT-150 HF automatic antenna tuner was developed primarily
for the IC-735 using advanced, state-of-the-art design techniques.
• PS-55
This is a 13.8V DC, 20A power supply recently developed specifi-
cally for use with the IC-735.
• AH-2
• CT-17
The AH-2 HF ALL BAND ANTENNA TUNER can be used to
match all HF amateur bands from *3.5 to 30MHz. One touch of the
TUNE SWITCH and the internal microprocessor in the AH-2 auto-
matically tunes the antenna to the lowest SWR within an average of
2 to 3 seconds.
*1.8 to 30MHz with an antenna of 12 meters or more.
The CT-17 CI-V LEVEL CONVERTER allows you to connect a
personal computer to the IC-735 for external control of operating
frequencies, modes, memory channels, etc.