HighPoint RocketRAID 432x User Manual page 12

Hardware – Description and Installation
2.1 – Installing the RocketRAID 4320 Host Adapter
Note: Make sure the system is powered-off before installing the RocketRAID 4320
host adapter.
1. Open the system chassis and locate an unused PCI-E x8 or x16 slot.
2. Remove the PCI slot cover.
3. Gently insert the RocketRAID 4320 into the PCI-E slot, and secure the bracket to
the system chassis.
4. After installing the adapter, attach the Mini-SAS cables to the RocketRAID
4320's Mini-SAS port, and the chassis backplane. Each Mini-SAS cable supports
up to 4 hard disk drives. Consult the chassis's manual for proper installation
procedures.
5. Close and secure the system chassis.
12