HighPoint RocketRAID 432x User Manual page 31

RocketRAID BIOS Utility
Spare Disks
Spare Disks are used to automatically rebuild Redundant RAID arrays in the case of
disk failure. As with creating RAID arrays, disks must be initialized before they can be
used as spares. To set a hard disk to act as a Spare Disk, switch to the Disk window,
use the arrow keys to select the target disk from the list of initialized disks, and press
Enter.
Highlight Disk from the toolbar, then select Toggle Spare, and press Enter.
To remove a spare, follow the same procedure. From the Disk window, select the
target Spare disk and press Enter. Highlight Disk from the toolbar, select Toggle
Spare and press Enter.
31