Treadmill & Monitor Operation - Sears Free Spirit C 249 30199 0 Owner's Manual

Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply silicone spray or
other substances to the walking belt or walking board. Such substances will deteriorate the walking belt and
cause excessive wear.
How to plug in the power cord.
GROUNDING INSTRUCTIONS.
This product must be grounded. No plug adapter should
be used with this product.
▲WARNING: Improper connection of the equipment
grounding conductor can result in a risk of an electric
shock. Check with a qualified electrician if you are in
doubt as to whether the product is properly grounded. Do
not modify the plug provided with the product, if it will
not fit the outlet; have a proper outlet installed by a
qualified electrician. The use of an extension cord with
this product is not recommended. If an extension cord is
needed, use a short (less than 10 feet) heavy gauge (14
gauge or better) extension cord with a three prong
(grounded) plug and receptacle. IMPORTANT: If the
power cord is damaged, it must be replaced with a
manufacturer recommended power cord.
1. Plug the indicated end of the power cord into
the socket of the treadmill.
below
2. Plug the power cord into an appropriate outlet
that is properly installed and grounded. See
drawing below. Important: The treadmill is
not compatible with GFCI-equipped outlets.
Note: Your power cord and outlet may appear different
TREADMILL OPERATION
See drawing
9