Symbols - Husqvarna 315, 320 Operator's Manual

SYMBOLS USED IN OPERATOR'S MANUAL:
Always disconnect power
before performing cleaning or
maintenance work.
Always use approved safety gloves.
Clean your chain saw regularly.
CAUTION!
Chain saws are dangerous!
Careless or improper use can result in severe or fatal injury.
SYMBOLS ON THE CHAIN SAW:
CAUTION!
Chain saws are dangerous! Careless
or improper use can result in serious
or fatal injury.
Read operating instructions and
make certain you understand them
thoroughly before using the chain
saw.
Always use:
• Approved helmet
• Approved hearing protection
• Approved safety goggles or face
mask
The chain saw is double-insulated.
Visual inspection.
Use approved face mask or
safety goggles.
Do not use a coiled extension cord.
Minimum wire cross-section: 1 mm
min. 1 mm 1
Maximum cable length: 30 m
max.
maks. 30 m
Voltage: 230 V
Do not expose saw to rain or
moisture.
Disconnect power in case of
damage to power cable.
Maximum permissible guide bar
400
MAX
length.
This product conforms to
applicable CE directives.
Noise emission to the environment
according to the European
Community's Directive. The machine's
emission is specified in «TECHNICAL
SPECIFICATIONS» p. 3 and on label.
1
2