Table of Contents
Advertisement
Symbols on the mac hine:
W ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
•
Approved protective helmet
•
Approved hearing protection
•
Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter
and on the label.
Chain brake, activated (right)
Chain brake, not activated
(left)
Decompression v alve: The valve is to
reduce the pressure in the cylinder and
make starting easier. You should always
use the decompression valve when
starting the machine.
Ignition; choke: Set the choke control
in the choke position. This should
automatically set the stop switch to the
start position.
Air purge
Refuelling.
Chain oil fill.
Adjustment of the oil pump
2 – English
KEY T O SYMBOLS
If your machine bears this symbol it
is equipped with heated handles.
Always use the recommended
spark plug type! Use of the
wrong spark plug can damage
the piston/cylinder. Check that
the spark plug is fitted with a
suppressor.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Advertisement
Table of Contents
